Search

My Blinkies

Photobucket
Photobucket

Stuff

MyFreeCopyright.com Registered & Protected

Designers I CT for


 photo WickedPrincessScraps.gif
 photo JoCTblnk1_MadebyAngelsDesignz.gif
 photo 153ky2f.gif

Blogs I support

Photobucket

CU Licenses I hold

Photobucket
 photo HF_PCU4CUKadodledbyKaciLicense-Resized.png

Total Pageviews

Tags w/ Kits&Kadoodles

Networked Blog

Blogroll

Sunday, October 21, 2012

Breathe featuring Colour Me & PinUpToons (PTU)




This tutorial was written entirely by me, using PSP9, any resemblance to any other is purely coincidental.
This tutorial should work with any version of PSP.
This tutorial is written with the belief that you have a working knowledge of PSP, but is also suitable for beginners.

Materials you will need:

Scrap Kit of choice, I used Colour Me by TLP Designz.
Tube of choice, I used the art of ©PinUpToons which requires a license which may be purchased at CDO.
Mask of choice, I used one I made, and you may get it here.
Word Art of choice, I used one from Create with TLC, you may find it here.
Garadient of choice. I made one using colors from my tag.
Font of choice, I used Water Brush Rob.

Filters: 
Xero ~~ Radiance
Xero ~~ Porcelain
EyeCandy 4000 ~~ Gradient Glow

Let's begin.
Open a new image, 750x750 you will re-size later.
Copy and paste a paper into your image and apply your mask. 
(Layers, Load/Save Mask, Apply mask from Disk)
Merge the group. 
(Layers, merge, Merge group)
Now add a Gaussian blur of 4. 
(Adjust, Blur,  Gaussian Blur)
Begin placing elements and add a drop shadow, I used 3,4,50,12
Place your tube and add the drop shadow the add an additional drop shadow -3,-4,50,12.
Next apply Radiance with these settings:


You can change the setting to suit your tube.
Now apply Porcelain with these settings:


Again you can play with the settings until you find what works with your tube.
You may add a gradient glow to your tube and to any elements as you see fit.
Finish placing your elements as desired.
Now place and re-size your word art as necessary.
Select all, float and defloat then flood fill your word art with a gradient of choice then de-select.
Now add a drop shadow of choice then add a gradient glow of choice to match your tag.
Now re-size add your copyright and your name.
Thank you for trying our my tutorial.


Thursday, October 18, 2012

Wistful featuring Autumn Romance & Zebrush (PTU)


This tutorial was written entirely by me, using PSP9, any resemblance to any other is purely coincidental.
This tutorial should work with any version of PSP.
This tutorial is written with the belief that you have a working knowledge of PSP, but is also suitable for beginners.

Materials you will need:
Scrap Kit of choice, I used Autumn Romance by Honored Scraps.
Tube of choice, I used the art of ©Zebrush which requires a license which may be purchased at PFD.
Mask of choice, I used WSL_Mask363, and you may get it here.
Font of choice, I used Hummingbird.

Filter: 
Zero ~~ Radiance
EyeCandy 4000 ~~ Gradient Glow

Let's begin.
Open a new image, 750x750 you will re-size later.
Copy and paste as a new layer a paper from your kit.
Apply your mask (Layers, Load/save mask, Load mask from disk).
Merge (Layers, Merge, merge group).
Copy and paste a frame into your image and position as desired.
Add a drop shadow of choice or you may use these setting; 4,6,55,13.
Copy and paste your tube into your image, add your drop shadow and postion as desired.
Apply Radiance with these settings:


You may choose other settings for your tube just play until you get what you like.
Duplicate your tube and move the original layer beneath your frame and the duplicate above it.
Using your erase tool erase any parts of your tube on both layers outside of the frame until the tube is coming out of the frame as desired.
Begin placing your elements, you may us your manual correct tool to adjust the tones of the kit as needed.


Apply Radiance and or Gradient Glow to some of your elements to highlight them as well.
If you are using my tag as a guide I used radiance on the bird as well as the butterflies 
(used Manual color correct & Gradient glow on these too).

Re-size your elements as desired to fit your tube.
Once you have achieved the result you like, re-size, add your copyright and you name.
Thank you for completing my tutorial.





Sunday, October 14, 2012

Watching me featuring To the Moon & Barbara Jensen





This tutorial was written entirely by me, using PSP9, any resemblance to any other is purely coincidental.
This tutorial should work with any version of PSP.
This tutorial is written with the belief that you have a working knowledge of PSP, but is also suitable for beginners.

Materials you will need:
Scrap Kit of choice, I used To the Moon by Crafted by Gina.
Tube of choice, I used the art of ©Barbara Jensen which requires a license which may be purchased at her store.
Mask of choice, I used WSL_Mask133, and you may get it here.
Font of choice, I used Child's Play.

Filters: 
Xero ~~ Clarity
Mura Meister's ~~ Copies

Let's begin.
Open a new image, 750x750 you will re-size later.
copy and past a paper from your kit into your image and apply your mask.
(Layers, Load/Save Mask, Load mask from Disk)
Then merge the group. (Layers, Merge, Merge group)
Copy and paste a frame from your kit, and position as desired upon the mask layer.
Using a scatter from your kit, place and position as desired duplicating and mirroring as needed.
Back to the frame layer, using your magic wand tool Click inside one of the frame openings and select then expand by 5.
(Selections, Modify, Expand)
Position different Moon man elements from your kit Using free rotate and the deform tool as needed.
Invert and delete. (to invert Ctrl+Shift+I) then deselect (Ctrl+D).
Repeat as necessary. 
If you'd like to have Moonman bits peek through the "window" duplicate and move it above the frame layer and use the erase tool on extra bits.
Add a drop shadow to all. I used 3,3,45,12.
Now begin to place foliage as desired add your drop shadow as needed.
Place some of the flower elements from your kit
On some of the flower elements Add Copies with these settings:


Then on another of the same flower element add the Copies with this settings:


Now place your tube and position as desired apply the Clarity filter with these settings or those that suit your tube:


Add your drop shadow twice, then add a drop shadow of -3,-3,45,12.
Duplicate and add a Gaussian blur of 3 (Adjust, blur, Gaussian blur).
Adjust the properties to Overlay (Layers, Properties).
Finish adding any elements you'd like and adjust as needed.
Re-size your tag, add your copyright and your name.
Thank you for trying out my tutorial.






Rockabilly Girl featuring Rockabilly Wedding & Myka Jelina






This tutorial was written entirely by me, using PSP9, any resemblance to any other is purely coincidental.
This tutorial should work with any version of PSP.
This tutorial is written with the belief that you have a working knowledge of PSP, but is also suitable for beginners.

Materials you will need:
Scrap Kit of choice, I used Rockabilly Wedding by Scrappin Krazy Designs.
Tube of choice, I used the art of ©Myka Jelina which requires a license which may be purchased at her store.
Mask of choice, I used WSL_Mask209, and you may get it here.
Font of choice, I used Pixie Moon.

Filters:
Zero ~~ Porcelain 
EyeCandy 4000 ~~ Gradient Glow

Let's begin.
Open a new image, 750x750 you will re-size later.
Copy and paste into your image a paper from your kit, and apply your mask of choice.
(Layers, Load/Save Mask, Load Mask from Disk) Merge the group (Layers, Merge, Merge group).
Next take your piano element and using your smudge brush smudge the hard edges a bit then take your curtain element and place as desired.
Merge the two elements and apply the same mask with the steps above.
Place your tube into your image and apply a drop shadow of 4,4,50,12. 
Apply Porcelain with these settings:


Duplicate the tube and add a Gaussian blur of 4 (Adjust, Blur, Gaussian blur).
Change the properties on this layer to Overlay (Layers, Properties, Overlay).
Begin placing your other elements, re-sizing as desired adding a drop shadow as needed.
Gradient Glow may also be added with these settings or those of your choice:

 


When adding a gradient glow, change the colors as needed to compliment your tag.
Once you have achieved your desired result, re-size, add your copyright and your name.
Thank you for trying out my tutorial.




Saturday, October 13, 2012

Gothic Love featuring Gothic Hearts & Zindy






This tutorial was written entirely by me, using PSP9, any resemblance to any other is purely coincidental.
This tutorial should work with any version of PSP.
This tutorial is written with the belief that you have a working knowledge of PSP, but is also suitable for beginners.

Materials you will need:
Scrap Kit of choice, I used Gothic Heart by CBJ Scraps.
Tubes of choice, I used the art of ©Zindy S. D. Nielsen which requires a license which may be purchased at Zindy Zone Store.
Mask of choice, I used NikMask10, and you may purchase it here.
Font of choice, I used Black Chancery.

Filters: 
EyeCandy4000 ~~ Gradient Glow
Xero ~~ Radiance

Let's begin.

Open a new image, 750x750 you will re-size later.
Begin with sparkles from your kit, copy and paste several layers around on your image to scatter them around evenly then merge visible.
(Layers, Merge, Merge visible)
Copy and paste your paper choice into the image then apply your mask (Layers, Load/save mask, Load mask from disk).
Merge the group (Layers, merge, Merge group).
Choose words elements from your kit and place above the mask layer and re-size as necessary, apply the same mask and merge the group.
Place your first tube as desired add a drop shadow of choice I used 6,6,60,12. Then apply Radiance with these settings:


Add a gradient glow with these settings:


Now Place your second tube as desired and apply the same drop shadow then radiance with these settings:


Add a gradient glow. You may adjust the gradient glow as needed to fit your needs on all of the elements and tubes this applies to Radiance as well. Sometimes you need to adjust the settings to suit your tube or your element.
Begin to place your elements round your tubes as needed.
For your frame element re-size and position as desired.
Re-size your tubes down to fit the frame.
On the frame layer use your magic wand tool and the shift key to select inside each of the frames.
Position your tubes "in" the frame using your erase tool to erase any overlapping bits then merge the layers and invert and delete.(Shift+Ctrl+I) then click delete. Select None or Ctrl D.
Move the small tube layer beneath the frame layer and duplicate.
On the original layer change the properties to Luminance.
On the duplicate layer add a gaussian blur of 2 (Adjust, blur, Gaussian blur) then change prperties to overlay.
Adjust the transparency to 80 or whatever your choice is.
Continue placing your elements as desired using duplicates and your erase tool to help blend the elements as desired.
You may also use your Radiance or gradient glow filter to help certain elements pop.
To adust the colors/hue of elements to compliment your tubes you may use the manual color correction or the colorize tool.
Play with your filters to achieve your vision.
Once you have achieved the desired reult, re-size, add your copyright and your name.
You have now completed this tutorial, thanks for giving it a try.



Friday, October 12, 2012

Whatever Cupcake featuring Cupcake Attitude & Kaci McVay





This tutorial was written entirely by me, using PSP9, any resemblance to any other is purely coincidental.
This tutorial should work with any version of PSP.
This tutorial is written with the belief that you have a working knowledge of PSP, but is also suitable for beginners.

Materials you will need:
Scrap Kit of choice, I used Cupcake Attitude by Wicked Princess Scraps.
Tube of choice, I used the art of ©Kaci McVay which requires a license which may be purchased at TPP.
Mask of choice, I used mymask30, and if this is your work, please contact me so I can credit you.
Font of choice, I used Fraggle.
Word Art of choice or you may use this from me.

Filters:
Xero ~~ Porcelain 
EyeCandy 4000 ~~ Gradient Glow
Mura Meister ~~ Copies

Let's begin.
Open a new image, 750x750 you will re-size later.
Copy and paste a paper from your kit into your image and apply your mask.
Merge your group. 
Add a fire element from your kit and apply Copies with these settings:


Apply your mask to this layer and merge group.
Duplicate and re-size 80 and move up some to make a good blend.
Place your tube as desired and add a drop shadow of 6,6,55,14 or one of your choice then apply Porcelain with these settings:


Duplicate your tube and close your duplicate layer.
Apply your mask to the original layer and merge the group.
Open the duplicate tube layer and erase the bits around the mask at the bottom so there is nothing at the bottom.
Begin to add your elements around your tube.
Add a drop shadow and a gradient glow of choice or with these settings:

 

You may add these filters to any or all elements and make changes as desired.
You need to choose a word art or make one to go with one from the kit, I have supplied what I made for this tag if you'd like.
Merge your word art with one of the word elements from the kit, you may use my tag as a guide.
Apply your filters to the elements as desired to make it pop as you'd like.
When you've achieved the desired effect, re-size, add your copyright and your name.
You have now completed my tutorial, thank you for giving it a try.



I Did featuring I Do and Deacon Black (PTU)





This tutorial was written entirely by me, using PSP9, any resemblance to any other is purely coincidental.
This tutorial should work with any version of PSP.
This tutorial is written with the belief that you have a working knowledge of PSP, but is also suitable for beginners.

Materials you will need:
Scrap Kit of choice, I used I Do by Gina's Gems Scraps.
Tube of choice, I used the art of ©Deacon Black which requires a license which may be purchased at CDO.
Mask of choice, I used mymask38, and if this is your work, please contact me so I can credit you.
Font of choice, I used Bickham Script Fancy.

Filters:
Xero ~ Porcelain 
Xero ~ Radiance
EyeCandy 4000 ~ Gradient Glow

Let's begin.
Open a new image, 750x750 you will re-size later.
Copy and paste as a new layer into your image a paper from your kit.
Apply your mask (Layers, load/save mask, Load mask from disk).
Merge the group (Layers, Merge, Merge group).
Add a Gradient Glow with these settings:

 

Copy and paste a frame from your kit into your image above the mask layer.
Using your magic wand tool while holding down the shift button click inside each of the frame openings
 (being sure to select even the smallest space).
Expand your area by 4 (Selections, Modify, Expand).
Copy and paste a complimentary paper from your kit beneath the frame layer and invert then delete. 
 (Selections, invert, then the delete button, select none)
On your frame layer add a drop shadow 6,6,55,14 then add the same gradient glow or one of choice.
Now place your tube add a drop shadow and apply Porcelain with these settings:


Then apply Radiance with these settings:


Duplicate the tube and move one layer beneath the frame layer, then using your erase tool erase all bits on both layers outside the frame.
Now using the magic wand tool again click on the second opening... if you used a dual frame, and select inside the frame.
Place a re-sized smaller copy of your tube then invert, and delete. Add a drop shadow of choice or same as above. Duplicate.
On the first layer of the smaller tube Change properties to Luminance (Legacy).
On the duplicate layer change properties to overlay and adjust transparency as desired between 45-60.
Add your other elements as desired, and re-size, add a drop shadow, gradient glow and adjust transparency as necessary.
Use your erase tool on elements to help them blend and intertwine , most of all have fun with it!
Once you've achieved your desired result re-size, add your copyright and your name.
You have completed this tutorial, thanks for giving it a try.







Thursday, October 11, 2012

Bootiful Concoction featuring You're Bootiful & Amy Matthews





This tutorial was written entirely by me, using PSP9, any resemblance to any other is purely coincidental.
This tutorial should work with any version of PSP.
This tutorial is written with the belief that you have a working knowledge of PSP, but is also suitable for beginners.

Materials you will need:
Scrap Kit of choice, I used You're Bootiful by Crafted by Gina.
Tube of choice, I used the art of ©Amy Matthews which requires a license which may be purchased at CDO.
Mask of choice, I used Mask199_Kreations8686, and if this is your work please contact me so I can credit you.
Font of choice, I used .

Filters: 
Xero ~~ Radiance
EyeCandy4000 ~~ Gradient glow
EyeCandy 5 Nature ~~ Water Drops & Fire
Xero ~~ Soft Mood


Let's begin.

Open a new image, 750x750
Copy and paste a paper from your kit into your image and apply your mask.(Layers, Load/save mask, Load from disk)
Merge your group (Layers, Merge, merge group)
Next place your tree element and re-size 125 duplicate and keep duplicate layer on the top then go back to the original layer.
Place your cabin element then merge this layer with your original tree layer and apply SoftMood with these settings:


Now apply the same mask to the merged layer. 
Go to the duplicate tree layer and reopen add a drop shadow of choice I used 5,5,50,13.
Using your erase tool erase the edges of the duplicate tree layer to remove hard edges and blend with the tree on the mask layer.
You may use my tag as a guide if you'd like.
Place your tube as desired and add a drop shadow then apply Radiance with these settings:


Next add a gradient glow of choice or you may use these settings:


Now begin placing other elements of choice adding a drop shadow of choice and adjusting transparency as necessary.
If you use the cauldron as one of your elements you may "fill" it by taking the drips element and re-size as desired then using the deform tool "compress" it.
Next you add a Gaussian blur of 3, then you apply Water Drops with these settings:


You may repeat this step as needed using random seed on the Water Drops filter.
Next take your drips element and re-size 40 then add another layer of drops re-sized 30 and position as desired and merge the layers.
Using the mesh tool adjust the cure of your drips to suit your vision.
Next add another drips element and free rotate to the left 90 re-size as desired. 
Using your erase tool erase all but one of the drips then position above the other drips layer and using the mesh adjust the cure of the layer to "spill over" the drips layer.
Add a desired drop shadow to both layers.
Now using the free hand selection tool select a small area beneath the cauldron layer and create a new raster.
Apply the Fire filter with these settings:


Then apply again to the same layer hitting random seed.
Place more elements as desired re-sizing and applying a Drop Shadow when necessary and applying any of the filters to enhance your elements.
Re-size your tag, add your copyright and your name, you have now completed my tutorial.
Thank you for giving it a try.







Wednesday, October 10, 2012

Dreaming a Cure featuring I Believe~ BCA Collection with Zindy





This tutorial was written entirely by me, using PSP9, any resemblance to any other is purely coincidental.
This tutorial should work with any version of PSP.
This tutorial is written with the belief that you have a working knowledge of PSP, but is also suitable for beginners.

Materials you will need:

Scrap Kit of choice, I used I Believe BCA Collection by CBJ Scraps.
Tube of choice, I used the art of ©Zindy Nielsen which requires a license which may be purchased at Zindy Zone.
Mask of choice, I used KBH_2012_Mask5, by me and you may download it here.
Font of choice, I used Billy Argel Font.

Filters: 
Xero ~ Radiance
Xero ~ Porcelain
EyeCandy ~ Gradient Glow


Let's begin.

Open a new image, 750x750
Copy and paste a paper from your kit into your image and apply your mask (Layers, Load/Save Mask).
Merge the group together (Merge, merge group).
Now place a frame from your kit into the image and re-size as necessary. I re-sized 67.
Add a drop shadow of choice, I used 5,5,50,10.
Place your tube of choice, and add your same drop shadow then apply Radiance with these settings:


Duplicate. Move the original tube layer beneath the frame layer, and the duplicate above the frame layer.
Using your erase tool, erase the edges and the parts of the tube "outside" the frame. 
Once you've done this duplicate this tube layer and apply a Gaussian Blur of 3 then change the properties to overlay.
Begin to place your elements re-size as necessary between 20 & 60.
Apply Radiance using the same settings of any element desired to help make it pop.
You may also apply Porcelain to elements, like the butterflies to help them to stand out, with these settings:


If you choose you may add a gradient glow to various elements and your name with these settings:

 

Once you've finished placing your elements as desired, re-size your tag, add your copyright and your name.
You've now completed my tutorial. Thank you for giving it a try.
Remember to:






Tuesday, October 9, 2012

Spookatacular Class featuring Spooktacular Academy & Ismael Rac


This tutorial was written entirely by me, using PSP9, any resemblance to any other is purely coincidental.
This tutorial should work with any version of PSP.
This tutorial is written with the belief that you have a working knowledge of PSP, but is also suitable for beginners.

Materials you will need:

Scrap Kit of choice, I used Spookatacular Academy by Wicked Princess Scraps.
Tube of choice, I used the art of ©Ismael Rac which requires a license which may be purchased at Xeracx Store.
Masks of choice, I used Mask Strikout_SHVC and MontiCircleMask, you may get Monti's mask here
   and if the other mask is your work, please contact me so I can credit you.
Font of choice, I used JackLanternBB.

Filter:
Xero - Radiance
EyeCandy4000 - Gradient Glow 


Let's begin.

Open a new image, 750x750
Copy and paste as a new layer into your image a paper from your kit. 
Apply your first mask choice (Mask Strikout_SHVC) then merge the group.
now apply the second mask (MontiCircleMask) and merge group, then merge down.
Begin by placing some of your elements. 
I started with the locker, and the desk and added a drop shadow of 6,6,60,16.
If you choose to go the way I went, feel free to add the same elements, or go your own way.
When adding your ghost elements adjust the transparency to 70.
Re-size  your elements between 20-60 and use your deform tool as necessary.
Place your tube and position as desired.Add your drop shadow, then apply Radiance with these settings:


Duplicate the tube layer, and add a Gaussian Blur of 5 and change the properties to Soft Light.
You may add the radiance settings to any of your elements to make them pop.
You may also add a gradient glow to your ghost elements with these settings:

 

Now add a gradient glow to the tube and ghost elements with these settings:

Re-size add your copyright and your name.
You have completed my tutorial.






Kaci's Kits & Kadoodles

Hi, I'm Kaci. Nope not that Kaci, the other one. I am still fairly new to PSPing compared to some and I love it!! I want to continue to learn so I can get better and continue making my own scrap kits. I love to make new friends so stop by and visit my little corner over here.

I'm still learning to blog too, so be patient while I figure this out, and I'm learning to do blog layouts, lol. I'm happy to have a few followers and look forward to more.

I've recently ventured into Digital scrap-booking store ownership with friends, so feel free to check out the links on the page.

I also love to knit, crochet (not really good at that just yet), read, cook, bake and learn new things. Most of what I post will probably be PSP related, but Iwill occasionally vent here too. Please leave a comment let me know what you think or if you want me to try something for a freebie.

I would love to see the results of my tutorials if you want to share. Please email them to me at kaciskitsnkadoodles@gmail.com. I look forward to seeing results of my tuts so come on email me lol!!!

Followers

Leave a bit of Love

Licenses I hold

 photo crowe.gif
 photo BJBlinky2.gif
 photo CDOBLI11817.gif
 photo DLPinups.jpg
 photo EASbyDMM-vi.gif
 photo FXD-Store-blinkie150.gif
 photo gg3.gif
 photo gorjussblinkie04.gif
Jose Cano
 photo mtabl.gif
 photo mykagraphics_banner2.png
 photo 150x50.gif
 photo iws0g4.gif
Roman Zaric
 photo 1g4uibjpg_zps0a9af0b1.gif
Tony Tzanoukakis
 photo 2cjcb8.gif
 photo m9lfzq.gif
 photo UYAnew620.gif
Very Many Tubes
 photo zz.jpg

CLOSED STORES:
So Sweet Scraps
Scraps n Crap
MPT
PTE
The Hunter
PSP Asylum
Michi Art
 photo SATC_188.gif
 photo DSI-Banner1.gif

Counter

cheap calling cards

Categories