Search

My Blinkies

Photobucket
Photobucket

Stuff

MyFreeCopyright.com Registered & Protected

Designers I CT for


photo WickedPrincessScraps.gif
photo JoCTblnk1_MadebyAngelsDesignz.gif
photo 153ky2f.gif

Blogs I support

Photobucket

CU Licenses I hold

Photobucket
photo HF_PCU4CUKadodledbyKaciLicense-Resized.png

Total Pageviews

Tags w/ Kits&Kadoodles

Networked Blog

Blogroll

Showing posts with label Snags. Show all posts
Showing posts with label Snags. Show all posts
Monday, December 2, 2013

Emolution Party snags

6:40 PM | Posted by | Edit Post

Here are some snags I made using the fabulous Emolution Party kit by Wicked Princess Scraps.
You can check out her blog to find where to get this awesome kit!!








Attitude Too featuring Attitudal Problem and KiwiFireStorm

8:16 PM | Posted by | Edit Post

This tutorial was written entirely by me, using PSP9, any resemblance to any other is purely coincidental.
This tutorial should work with any version of PSP.
This tutorial is written with the belief that you have a working knowledge of PSP, but is also suitable for beginners.

Materials you will need:

Scrap Kit of choice, I used Attitudal Problem by Wicked Princess Scraps.
Tube of choice, I used the art of ©KiwiFireStorm which requires a license which may be purchased at TPP.
Mask of choice, I used KBH_2013_Mask26, and you may get it here.
Font of choice, I used Billy Argyle Font.

Filters: 
Penta ~ Dot and Cross
Andrew's Filters 13 ~ Swirling Swirlers



Let's begin.

Open a new image, 750 x 750, you will re-size later, then copy and paste a paper from your kit, now apply your mask.
To apply your mask click Layers, Load/Save Mask, Load Mask From Disk.
Now merge your group, Layers, Merge, Merge group.
Now choose a frame from your kit and using the magic wand tool click inside the frame then Modify the selection by 5.
(Modify your selection by clicking Selections, Modify, Expand.)
Open a new Raster layer, then flood fill with a color from either your tube or your kit.
On this layer apply Penta Dot and Cross with these settings:


Next apply Swirling Swirlers with these settings:


Select all, Float, De-float paste a copy of the close up of your tube as a new layer then invert and delete.
To invert simply click shift, Ctrl and I together. Then press delete.
Select none.
On the close up layer change properties to Hard light or Property of choice.
Duplicate this layer and add a Gaussian Blur of 5. Adjust, Blur, Gaussian Blur.
Change the properties to Overlay.
Now begin placing elements of choice around your frame layer above and below as desired.
You may re-size and add a drop layer of choice to any of your elements or tube. I used 0,0,100,10.
Re-size your tag, add your copyright and your name and you will have completed my tutorial.
Thank you for trying it.

Here are some extras that you can download of the above tag: Mediafire or 4shared

If you like extras here are some more you'd might like to download:
Mediafire or 4shared






Wild Thing featuring Wild Thing & Arthur Crowe (extras)

10:00 AM | Posted by | Edit Post




This tutorial was written entirely by me, using PSP9, any resemblance to any other is purely coincidental.
This tutorial should work with any version of PSP.
This tutorial is written with the belief that you have a working knowledge of PSP, but is also suitable for beginners.

Materials you will need:

Scrap Kit of choice, I used Wild Thing by Wicked Princess Scraps.
Tube of choice, I used the art of ©Arthur Crowe which requires a license which may be purchased at his store.
Mask of choice, I used a mask by me KBH_2012_Mask33, and you may get it over on Creative Misfits blog.
Font of choice, I used VTC Bad Tattoo Hand.

Filter: 
Xero ~ Porcelain

Let's begin.

Open a new image, 750x750 you will re-size later.
Copy and paste as a new layer a paper from your kit.I used PP5.
Apply your mask; Layers, Load/Save Mask, Load Mask from Disk.
Merge your group;Layers, Merge, Merge Group.
Place your tube, re-sizing as necessary.
Add a drop Shadow of 0,0,100,10; or you may add one of choice.
Apply Porcelain with these settings:


If these settings don't suit your tube, play with them until they fit more to your liking.
Begin placing your elements around your tube. Use flower, shoe, drink, and other elements that suit your tube of choice.
Re-size element between 35-80 to suit your purpose and balance your colors a bit.
Apply the same porcelain settings to various elements to highlight them.
Use the erase tool to help the elements blend well.
For your scatter element above the mask layer adjust your transparency to 80, so that it blends better.
Re-size, add your copyright and your name.
You have completed my tutorial.

Here are some extras for those that like them.
Stay tuned for a freebie cluster coming soon!




Wednesday, January 9, 2013

Full of Love(PTU) featuring Barbra Jensen & Heather's Devine Dezigns

8:40 PM | Posted by | Edit Post



This tutorial was written entirely by me, using PSP9, any resemblance to any other is purely coincidental.
This tutorial should work with any version of PSP.
This tutorial is written with the belief that you have a working knowledge of PSP, but is also suitable for beginners.

Materials you will need:
Scrap Kit of choice, I used My Heart Belongs to You by Heather's Devine Dezigns.
Tube of choice, I used the art of ©Barbara Jensen which requires a license which may be purchased at her store.
Mask of choice, I used one I made KBH_2013_Mask7, and you may get it here.
Font of choice, I used Cupie Doll.

Filters: 
Xero ~ Porcelain
AS EyeCandy 4000 ~ Gradient Glow


Let's begin.

Open a new image, 750x750 you will re-size later.
Copy and paste a paper from your kit as a new layer.
Apply your mask; Layers, Load/Save Mask, Load Mask from Disk.
Merge your group; Layers, Merge, Merge group.
Begin Placing your elements with a scatter element beneath the mask layer.
Duplicate, mirror & flip as needed to suit your mask.
Next place your tube Position as desired and apply a drop shadow of 0,0,100,10 or one of your choice.
Apply Porcelain with these settings:


Play with the settings to suit your tube if these don't work.
Now choose two flowers from your kit and re-size one 70 and one 80.
Now re-size a box/gift from your kit between 60-80, play with is depending on what you going for.
Choose some filigree and leaves from your kit, using the rotation tool position as desired, re-size as needed.
Using a word art from your kit re-size as needed and position to suit your tube.
Add gradient glow using these setting or those of your choice:

     

Continue adding elements and re-sizing as needed, add drop shadow and gradient glow to suit your vision.
If you are following my tag as a guide, you may decide to use a Planter element, if there are bits that show use your erase tool to achieve what you like.
Using a scatter like the heart scatter and using the rotate and erase tool position to come out of your box.
Duplicate and re-size as you see fit.
Using ribbon elements re-sized as needed position using the deform tool.
I duplicated and re-sized twice.
Re-size your tag, add your copyright and your name.
You have completed my tutorial.

Here are extras for those that like them.

Thank you for stopping by.







Monday, January 7, 2013

Cold Snow (PTU) featuring Scrap Schnegge & Marika (extras)

6:49 PM | Posted by | Edit Post



This tutorial was written entirely by me, using PSP9, any resemblance to any other is purely coincidental.
This tutorial should work with any version of PSP.
This tutorial is written with the belief that you have a working knowledge of PSP, but is also suitable for beginners.

Materials you will need:
Scrap Kit of choice, I used ScrapSchnegge-Marika-Pkg-15 by Schnegge.
Tube of choice, I used the art of ©Marika which requires a license which may be purchased at CDO.
Mask of choice, I used a mask by me KBH_2013_Mask6, and you may get it here.
Font of choice, I used Honey Bird.

Filters:
Xero ~ Porcelain
Muras ~ Copies 

Let's begin.
Open a new image, 750x750, you will re-size later.
Copy and paste as a new layer a paper from your kit.
Apply your mask of choice; Layers, Load/Save mask, Load mask from disk.
Then merge your group; Layers, Merge, Merge Group.
Now place a glitter from your kit and position beneath the mask layer. 
Duplicate and flip or mirror as needed.
Place a frame (I used frame 4) from your kit, add a drop shadow of 0,0,100,10 or one of choice.
Using elements of choice place around your frame as desired.
If you use my tag as a guide I used elements 29, 26, 11 & 18.
Ribbon element 11 I duplicated and mirrored then erased part of the bow.
Merge the ribbon layers together and use the rotate/deform tool to help position.
Element 26 was re-sized 80, and all element have the drop shadow above.
Now place your tube and position as desired, then add the drop shadow above or that of choice.
Apply Porcelain with these settings:


Or you may use settings suited to your tube or vision.
Using a ribbon element from your kit (I used Element 14) position around your tube as desired.
Again if you are using my tag as a guide I positioned my ribbon element added a drop shadow as above, and duplicated.
Next use your erase tool on the duplicate layer of the ribbon above the tube layer and erase bits that you want.
Using the same ribbon element I re-sized 70 and mirrored and repeated the process.
Next using a snowflake element from your kit, I used element 42 re-size 25 and position as desired.
Apply Muras Copies with these settings:


Duplicate this layer, and on the duplicate layer apply these settings:


You may duplicate again and mirror & flip to help position your snowflakes as desired.
Use your erase tool to erase bits that you don't want on your tag.
Re-size your tag, add your copyright and your name. 
You have completed my tutorial.

Here are extras for those that like them.
Thanks for stopping by.





Subscribe to: Posts (Atom)

Kaci's Kits & Kadoodles

Hi, I'm Kaci. Nope not that Kaci, the other one. I am still fairly new to PSPing compared to some and I love it!! I want to continue to learn so I can get better and continue making my own scrap kits. I love to make new friends so stop by and visit my little corner over here.

I'm still learning to blog too, so be patient while I figure this out, and I'm learning to do blog layouts, lol. I'm happy to have a few followers and look forward to more.

I've recently ventured into Digital scrap-booking store ownership with friends, so feel free to check out the links on the page.

I also love to knit, crochet (not really good at that just yet), read, cook, bake and learn new things. Most of what I post will probably be PSP related, but Iwill occasionally vent here too. Please leave a comment let me know what you think or if you want me to try something for a freebie.

I would love to see the results of my tutorials if you want to share. Please email them to me at kaciskitsnkadoodles@gmail.com. I look forward to seeing results of my tuts so come on email me lol!!!

Followers

Leave a bit of Love

Licenses I hold

photo crowe.gif
photo BJBlinky2.gif
photo CDOBLI11817.gif
photo DLPinups.jpg
photo EASbyDMM-vi.gif
photo FXD-Store-blinkie150.gif
photo gg3.gif
photo gorjussblinkie04.gif
Jose Cano
photo mtabl.gif
photo mykagraphics_banner2.png
photo 150x50.gif
photo iws0g4.gif
Roman Zaric
photo 1g4uibjpg_zps0a9af0b1.gif
Tony Tzanoukakis
photo 2cjcb8.gif
photo m9lfzq.gif
photo UYAnew620.gif
Very Many Tubes
photo zz.jpg

CLOSED STORES:
So Sweet Scraps
Scraps n Crap
MPT
PTE
The Hunter
PSP Asylum
Michi Art
photo SATC_188.gif
photo DSI-Banner1.gif

Counter

cheap calling cards

Categories

Blogger Template created with Artisteer by .