Search

My Blinkies

Photobucket
Photobucket

Stuff

MyFreeCopyright.com Registered & Protected

Designers I CT for


photo WickedPrincessScraps.gif
photo JoCTblnk1_MadebyAngelsDesignz.gif
photo 153ky2f.gif

Blogs I support

Photobucket

CU Licenses I hold

Photobucket
photo HF_PCU4CUKadodledbyKaciLicense-Resized.png

Total Pageviews

Tags w/ Kits&Kadoodles

Networked Blog

Blogroll

Showing posts with label Wicked PrincessScraps. Show all posts
Showing posts with label Wicked PrincessScraps. Show all posts
Sunday, June 2, 2013

Divine Nostalgia Featuring Divine Beauty and Barbara Jensen

12:20 PM | Posted by | Edit Post


This tutorial was written entirely by me, using PSP9, any resemblance to any other is purely coincidental.
This tutorial should work with any version of PSP.
This tutorial is written with the belief that you have a working knowledge of PSP, but is also suitable for beginners.

Materials you will need:

Scrap Kit of choice, I used Devine Beauty by Wicked Princess Scraps.
Tube of choice, I used the art of ©Barbara Jensen which requires a license which may be purchased at her store.
Mask of choice, I used Mask179, and I'm not sure where I got it but if this is your work, please contact me so I can credit you.
Font of choice, I used Belluccia Stylistic.

Filter: 
Xero ~ Porcelain
Xero ~ Nostalgia

Let's begin.

Open a new image, 750x750, You will re-size later.
Copy and paste a paper into your image and apply your mask, Layers, Load/Save Mask, Load Mask From Disk.
Merge group, Layers, Merge, Merge group.
Begin placing some of your elements if you are using my tag as a guide Start with your clock element re-sized 75, 
   change Properties to Color (Legacy) Position as desired.
Place your key element and adjust the properties to Soft Light.
You may add a drop shadow to your elements as desired. I used 0,0,100,10.
Using one of the charm elements Apply your mask to the layer first then merge the group then apply your mask to the canvas and merge group.
Duplicate this layer on first copy of the layer change properties to Color (Legacy), 
   on the second copy change properties to screen then merge down.
Change the properties to Difference. If you need to adjust the color a bit you can use the Manual Color Corrector.
Place your tube and add the drop shadow of choice. Duplicate. 
Move duplicate layer beneath the original tube layer and apply your mask to canvas.
Using your erase tool on the original layer erase bits for a smooth blend with the layer beneath.
Merge down and re-name layer Tube (if you want to make it easy to find the tube layer).
Duplicate the tube layer twice. 
On the original layer apply porcelain with these settings:

On the layer closest to the original layer Color the tube to a color in your kit and adjust properties to Saturation (Legacy).
Adjust the transparency to 60 or that of your choice.
On the top tube layer add a Gaussian Blur of 7 (Adjust, Blur, Gaussian Blur) then adjust the properties to Overlay.
Place other elements of choice as desired.
If you are using my tag as a guide I chose one of the flower elements re-sized 75 and apply Porcelain with these settings:

I re-sized the bottle and the jeweled envelope as needed to suit me.
On the Jewelry box I applied Nostalgia with these settings:

Now re-size your tag, add your copyright and your name.
You have now completed my tutorial.
Thanks for giving it a try.

You can find extras of this tag here: Box or 4shared

Here is another set of extras using this fabulous kit .


You can download the here: Box or 4shared







Attitude Too featuring Attitudal Problem and KiwiFireStorm

8:16 PM | Posted by | Edit Post

This tutorial was written entirely by me, using PSP9, any resemblance to any other is purely coincidental.
This tutorial should work with any version of PSP.
This tutorial is written with the belief that you have a working knowledge of PSP, but is also suitable for beginners.

Materials you will need:

Scrap Kit of choice, I used Attitudal Problem by Wicked Princess Scraps.
Tube of choice, I used the art of ©KiwiFireStorm which requires a license which may be purchased at TPP.
Mask of choice, I used KBH_2013_Mask26, and you may get it here.
Font of choice, I used Billy Argyle Font.

Filters: 
Penta ~ Dot and Cross
Andrew's Filters 13 ~ Swirling Swirlers



Let's begin.

Open a new image, 750 x 750, you will re-size later, then copy and paste a paper from your kit, now apply your mask.
To apply your mask click Layers, Load/Save Mask, Load Mask From Disk.
Now merge your group, Layers, Merge, Merge group.
Now choose a frame from your kit and using the magic wand tool click inside the frame then Modify the selection by 5.
(Modify your selection by clicking Selections, Modify, Expand.)
Open a new Raster layer, then flood fill with a color from either your tube or your kit.
On this layer apply Penta Dot and Cross with these settings:


Next apply Swirling Swirlers with these settings:


Select all, Float, De-float paste a copy of the close up of your tube as a new layer then invert and delete.
To invert simply click shift, Ctrl and I together. Then press delete.
Select none.
On the close up layer change properties to Hard light or Property of choice.
Duplicate this layer and add a Gaussian Blur of 5. Adjust, Blur, Gaussian Blur.
Change the properties to Overlay.
Now begin placing elements of choice around your frame layer above and below as desired.
You may re-size and add a drop layer of choice to any of your elements or tube. I used 0,0,100,10.
Re-size your tag, add your copyright and your name and you will have completed my tutorial.
Thank you for trying it.

Here are some extras that you can download of the above tag: Mediafire or 4shared

If you like extras here are some more you'd might like to download:
Mediafire or 4shared






Love Never Dies featuring Sinfully Delightful

3:01 PM | Posted by | Edit Post



This tutorial was written entirely by me, using PSP9, any resemblance to any other is purely coincidental.
This tutorial should work with any version of PSP.
This tutorial is written with the belief that you have a working knowledge of PSP, but is also suitable for beginners.

Materials you will need:

Scrap Kit of choice, I used Sinfully Delightful by Wicked Princess Scraps.
It is a freebie here until Feburary 10th.
Tube of choice, I used the art of ©PinUpToons which requires a license which may be purchased at CDO.
Mask of choice, I used KBH_2013_Mask9 made by me, and you may get it here.
Word Art of choice, I can't remember where I got this word art, but if it is your work, please contact me so I can credit you.
Font of choice, I used Scriptina.

Filter: 
Xero ~~ Porcelain
EyeCandy 4000 ~~ Gradient Glow

Let's begin.
Open a new image, 750x750, you will re-size later.
Copy and paste as a new layer a paper from your kit.
Apply your mask; Layers, Load/Save Mask, Load Mask from Disk.
Merge your group: Layers, Merge, Merge group.
Begin a table element from your kit, add a drop shadow of; 0,0,100,10, or that of your choice.
Place chair element of choice repeating the drop shadow. 
Place elements as desired re-sizing between 35 & 80 you can also use your deform tool the assist with this step.
On various elements and/or your word art add a gradient glow with these settings:

      


If you'd like to change the color of your word art go to Manual Color Correction then click on the original color 
then click on target and choose the color you'd like it to be.


Place your tube and add your drop shadow then apply Porcelain with these settings:


Once you've finished arranging your tube and elements re-size your tag as desired, add your copyright and your name.
You've now completed my tutorial, thanks for trying it out.








Wild Thing featuring Wild Thing & Arthur Crowe (extras)

10:00 AM | Posted by | Edit Post




This tutorial was written entirely by me, using PSP9, any resemblance to any other is purely coincidental.
This tutorial should work with any version of PSP.
This tutorial is written with the belief that you have a working knowledge of PSP, but is also suitable for beginners.

Materials you will need:

Scrap Kit of choice, I used Wild Thing by Wicked Princess Scraps.
Tube of choice, I used the art of ©Arthur Crowe which requires a license which may be purchased at his store.
Mask of choice, I used a mask by me KBH_2012_Mask33, and you may get it over on Creative Misfits blog.
Font of choice, I used VTC Bad Tattoo Hand.

Filter: 
Xero ~ Porcelain

Let's begin.

Open a new image, 750x750 you will re-size later.
Copy and paste as a new layer a paper from your kit.I used PP5.
Apply your mask; Layers, Load/Save Mask, Load Mask from Disk.
Merge your group;Layers, Merge, Merge Group.
Place your tube, re-sizing as necessary.
Add a drop Shadow of 0,0,100,10; or you may add one of choice.
Apply Porcelain with these settings:


If these settings don't suit your tube, play with them until they fit more to your liking.
Begin placing your elements around your tube. Use flower, shoe, drink, and other elements that suit your tube of choice.
Re-size element between 35-80 to suit your purpose and balance your colors a bit.
Apply the same porcelain settings to various elements to highlight them.
Use the erase tool to help the elements blend well.
For your scatter element above the mask layer adjust your transparency to 80, so that it blends better.
Re-size, add your copyright and your name.
You have completed my tutorial.

Here are some extras for those that like them.
Stay tuned for a freebie cluster coming soon!




Sunday, December 9, 2012

Let it Snow featuring Sweet Snow Friends & Gorjuss

11:11 AM | Posted by | Edit Post

This tutorial was written entirely by me, using PSP9, any resemblance to any other is purely coincidental.
This tutorial should work with any version of PSP.
This tutorial is written with the belief that you have a working knowledge of PSP, but is also suitable for beginners.

Materials you will need:
Scrap Kit of choice, I used Sweet Snow Friends by Wicked Princess Scraps.
Tube(s) of choice, I used the art of ©Suzanne Woolcott which requires a license which may be purchased at her store.
Mask of choice, I used ,WSL_Mask354 and you may get it here.
Cluster of choice I used one that I made with the kit above, you will find it here on this blog.
Font of choice, I used Snowhouse.

Filters: 
EyeCandy 5 ~ Nature ~ SnowDrift
Xero ~ Porcelain

Let's begin.
Open a new image, 750x750 you will re-size later.
Copy and paste a paper from your kit in to your image.
Apply your mask; Layers, Load/Save Mask, Load Mask from Disk.
Merge the group; Layers, Merge, Merge Group.
Now using the snowball(snow flake ball) element place above the mask layer.
Now place your Cluster, add a drop shadow if you'd like I used 0,0,100,10.
Now using the magic wand tool (holding down the shift key) click on areas of your cluster that you'd like covered in snow.
Open a new Raster and apply Snow drift on the setting Rooftop Accumulation & the basic on these settings or those of your choice:


Play with the setting until it suits you.
Next using a banner or ribbon element us your mesh tool to curve it to suit you.
Then you may us the same snow drift settings or play with others on this element.
Place other elements of choice and again apply snow drift as desired.
Now place your tube or tubes and add a drop shadow of choice or you can use the above setting.
Apply Porcelain with these settings or those that suit your tube:


Now using Snow drift again, setting on the large snow pile from bottom, Open a new raster and apply these basic settings:

Then re-size as desired and apply these basic settings:



Repeat this for however many snow mounds you'd like.
Place more elements to achieve your desired results.
Once you have achieved your vision, re-size, add your copyright and your name.
You have now completed my tutorial.
Thank you for trying it out.


Here is another version with the other freebie cluster available from this kit here on my blog.

















Tuesday, November 20, 2012

Spicey Sugar featuring Sugar and Spice and Gaetano DiFalco

11:25 AM | Posted by | Edit Post




This tutorial was written entirely by me, using PSP9, any resemblance to any other is purely coincidental.
This tutorial should work with any version of PSP.
This tutorial is written with the belief that you have a working knowledge of PSP, but is also suitable for beginners.

Materials you will need:
Scrap Kit of choice, I used Sugar & Spice by Wicked Prince Scraps.
Tube of choice, I used the art of ©Gaetano DiFalco which requires a license which may be purchased at CDO.
Mask of choice, I used KBH_2012_Mask7, by me and you may get it here.
Texture of choice, I used Bokeh Textures by Frozen Tears 1, may find it here.
Font of choice, I used The Daily Bread.

Filters: 
Xero ~ Porcelain
Eyecandy 5 ~ Bevel
Tramages ~ The Stump2
Mura Meister ~ Copies

Let's begin.
Open a new image, 750x750 you will re-size later.
Copy and paste as a new layer your paper from your kit.
Apply your mask (Layers, Load/Save Mask, Load Mask from Disk).
Merge your group ( Layers, Merge, Merge Group).
Now Apply your texture (Copy and paste the jpg over your paper layer).
Apply your mask,Merge group and adjust your Properties to Soft Light.
Apply  The Stump 2 with these settings:


Next begin placing your elements starting with your frame of choice, add a drops shadow of choice, I used 0,0,100,12.
Using your Erase tool,Duplicate, Mirror, and Flip (Image, Mirror Or Flip) to arrange your elements as desired.
Apply the Drop Shadow as desired.
Place your tube, again using your Duplicate and Erase tool for placement.
Add your Porcelain to all layers with these settings or those that suit your tube:


Duplicate again and add a Gaussian Blur of 3 and adjust your properties to Soft Light.
To add small elements to compliment your tube and tag using your brush tool add a diamond on a new raster layer and apply Copies with these settings:


Duplicate and adjust placement for both sides as desired and merge down.
Repeat this process with a star brush. Rotate and duplicate, merge down then add your drop shadow.
Re-size your tag, add your copyright and your name.
You have now completed my tutorial. 
Thank you for giving it a try.

Here are extras for those that like them.

Tuesday, October 9, 2012

Spookatacular Class featuring Spooktacular Academy & Ismael Rac

4:09 PM | Posted by | Edit Post

This tutorial was written entirely by me, using PSP9, any resemblance to any other is purely coincidental.
This tutorial should work with any version of PSP.
This tutorial is written with the belief that you have a working knowledge of PSP, but is also suitable for beginners.

Materials you will need:

Scrap Kit of choice, I used Spookatacular Academy by Wicked Princess Scraps.
Tube of choice, I used the art of ©Ismael Rac which requires a license which may be purchased at Xeracx Store.
Masks of choice, I used Mask Strikout_SHVC and MontiCircleMask, you may get Monti's mask here, 
   and if the other mask is your work, please contact me so I can credit you.
Font of choice, I used JackLanternBB.

Filter:
Xero - Radiance
EyeCandy4000 - Gradient Glow 


Let's begin.

Open a new image, 750x750
Copy and paste as a new layer into your image a paper from your kit. 
Apply your first mask choice (Mask Strikout_SHVC) then merge the group.
now apply the second mask (MontiCircleMask) and merge group, then merge down.
Begin by placing some of your elements. 
I started with the locker, and the desk and added a drop shadow of 6,6,60,16.
If you choose to go the way I went, feel free to add the same elements, or go your own way.
When adding your ghost elements adjust the transparency to 70.
Re-size  your elements between 20-60 and use your deform tool as necessary.
Place your tube and position as desired.Add your drop shadow, then apply Radiance with these settings:


Duplicate the tube layer, and add a Gaussian Blur of 5 and change the properties to Soft Light.
You may add the radiance settings to any of your elements to make them pop.
You may also add a gradient glow to your ghost elements with these settings:

       
 

Now add a gradient glow to the tube and ghost elements with these settings:

            
Re-size add your copyright and your name.
You have completed my tutorial.






Friday, September 7, 2012

Moo Kitty featuring Over the Moo 4 U & Alehandra Vanhek

11:27 PM | Posted by | Edit Post


This tutorial was written entirely by me, using PSP9, any resemblance to any other is purely coincidental.
This tutorial should work with any version of PSP.
This tutorial is written with the belief that you have a working knowledge of PSP, but is also suitable for beginners.

Materials you will need:

Scrap Kit of choice, I used Over the Moo 4U by Wicked Princess Scraps.
Tube of choice, I used the art of ©Alehandra Vanhek which requires a license,
 which may be purchased at PFD.
Mask of choice, I used one by the file name of 08,
 and if this is your work, please contact me so I can credit you.
Font of choice, I used Janda Stylish Script.

Filter: 
Xero - Radiance

Let's begin.

Open a new image, 750x750
Copy and paste as a new layer your paper choice from your kit, apply your mask then merge the group.
Start with your favorite element and work around the tag leaving a space for your tube. 
Add a drop shadow of choice, I used 3,3,50,10, to each element after you position.
Layer some of your flower elements and use the deform or free rotate tool to help position your layers for best effect.
Some elements will require re-sizing between 30-50 to fit if you use my tag as a guide, or you could use your vision.
Emphasize some of your elements by duplicating then adding a Gaussian blur of 3 and adjusting the properties between overlay or soft light.
Place your tube and add a drop shadow. 
If you are using a full size tube apply the same mask that you used on the paper then your erase tool to blend.
If you are using a close up tube use your erase tool to blend.
You may apply Radiance with these settings or those of your choice:


At times clicking random on the Radiance allows you to find a setting that may better suit the tube of your choice.
 Finish adding your elements around your tube and adjust to suit what looks best to you.
Re-size your tag, add your copyright then your name and you have completed this tutorial.
Thank you for trying it out.





Subscribe to: Posts (Atom)

Kaci's Kits & Kadoodles

Hi, I'm Kaci. Nope not that Kaci, the other one. I am still fairly new to PSPing compared to some and I love it!! I want to continue to learn so I can get better and continue making my own scrap kits. I love to make new friends so stop by and visit my little corner over here.

I'm still learning to blog too, so be patient while I figure this out, and I'm learning to do blog layouts, lol. I'm happy to have a few followers and look forward to more.

I've recently ventured into Digital scrap-booking store ownership with friends, so feel free to check out the links on the page.

I also love to knit, crochet (not really good at that just yet), read, cook, bake and learn new things. Most of what I post will probably be PSP related, but Iwill occasionally vent here too. Please leave a comment let me know what you think or if you want me to try something for a freebie.

I would love to see the results of my tutorials if you want to share. Please email them to me at kaciskitsnkadoodles@gmail.com. I look forward to seeing results of my tuts so come on email me lol!!!

Followers

Leave a bit of Love

Licenses I hold

photo crowe.gif
photo BJBlinky2.gif
photo CDOBLI11817.gif
photo DLPinups.jpg
photo EASbyDMM-vi.gif
photo FXD-Store-blinkie150.gif
photo gg3.gif
photo gorjussblinkie04.gif
Jose Cano
photo mtabl.gif
photo mykagraphics_banner2.png
photo 150x50.gif
photo iws0g4.gif
Roman Zaric
photo 1g4uibjpg_zps0a9af0b1.gif
Tony Tzanoukakis
photo 2cjcb8.gif
photo m9lfzq.gif
photo UYAnew620.gif
Very Many Tubes
photo zz.jpg

CLOSED STORES:
So Sweet Scraps
Scraps n Crap
MPT
PTE
The Hunter
PSP Asylum
Michi Art
photo SATC_188.gif
photo DSI-Banner1.gif

Counter

cheap calling cards

Categories

Blogger Template created with Artisteer by .