This tutorial is written for those wit a working knowledge of PSP. I used Version 9 but any version should work. This tutorial was written entirely by me and any resemblance to an other is purely coincidental. Supplies Needed: Tube of Choice I chose the artwork of ©Joel Adams. You need a license to use is work, You may purchase one at CILM Scrap kit of Choice I chose Blast from the Past by Stacey's Designs. Mask of Choice: I chose mask 304 by WeeScotLass Font of choice: Kingthings Slipperylip Let's get started Open a new image 750X750 (you will re-size later) copy and paste one of the kit papers into your image I chose paper 9. Now go to layers, Load/save mask and choose and apply your mask then merge, merge group Next choose your first element I chose Pink VW2 I added a drop shadow of 2,2,100,2 Next I chose the Peace word are re-sized 60, then used free rotate to the left 25.00 then I added a drop shadow of 2,2,100,2 Next I chose the doodle and re-sized 60 and placed and arranged several (5) layers you can use my tag as a reference then I added a drop shadow of , 3,3,100,12 Next I re-sized the Groovy word art and used the deform tool to place and rotate it I added a drop shadow of 2, 2, 100,2 then another drop shadow of 3,3,100,12.0 Next I re-sized the love word art 60 free rotated to the left 25 and used a drop shadow of 2,2,100,5 Finally You place one of the heart elements add a drop shadow of 3,3,100,11.0 Now place your tube add a drop shadow of 2, 2, 100, 2 then add a drop shadow of 3,3,100,12.0 Add your copyright, re-size and add your name you have completed this tutorial.

This tutorial is written for those with a working knowledge of PSP. I use version 9, but any should work. This tutorial was written solely by me and any resemblance to any other is purely coincidental. Supplies needed: Scrap Kit of choice: I chose Evil Purple by CrystalsCreations Tube of Choice (with Close-Up): I chose the PTU artwork of ©Ismael Rac You need a license to use his art you may purchase here. Mask of choice: I chose mask 306 by WeeScotLass Font of choice: Sick Capital Vice Plug-in Filter: Eye Candy 4000 gradient glow (Alien Skin) Let's get started: Open a new image 750x750 (you will re-size later) Chose colors from your kit and flood fill in the new image. Go to Layer, Load/Save Mask and apply your mask now merge, merge group then go to image and re-size that layer 115 add a new raster flood fill with a different color from your kit, apply the same mask,layers, Load/Save mask. Merge, Merge group Next I choose the wire and re-sized 125 and copied and pasted into my new image. Position underneath both layers. Next go to the larger mask layer and select all float and de-float copy and paste your close up over you mask position as desired invert, delete, select none now you will move the transparency to 50. Make sure that the close up layer is above both masks and wire layers. Now you may place your tube and add the desired drop shadow, I used 3,3,100,12.0 then I used gradient glow 3,25,100,#d39fd4,100 Next is the easy part you may add your elements as you chose, this is what I did: I added the candle re-sized @ 50 with a drop shadow of 2,2,100,10 Next I re-sized evil to 50 and used the same drop shadow and added the same gradient glow as the tube. Then I took the black cat element re-sized 25 and added the same drop shadow and gradient glow. Next I re-sized the black and grey roses 8 and copied and pasted into the new image and used the deform tool to place and re-size to suit. I rezied the skull to 15 and added a drop shadow and a gradient glow Next I used the purple ribbon twice and rotated and flipped to my liking Finally I used the evil bottle cap re-sized 15 and used the deform tool for placement. Now you may add your copyright and re-size, then add your name and you have completed my tutorial

This tutorial is written for those with a working knowledge of PSP. I use version 9 but any should work. Supplies used: Scrap kit of choice I chose: ~Casualties of love~ by Black Widow Exclusives Tube of Choice I chose the artwork of ©Anna Marine Which requires a license you may purchase at CILM Mask of choice: I used mask 363 by WeeScotLass Font of Choice I chose: Shelley Script LT Now let's get started Open a new image 750X750 Choose a paper from your kit I used paper 14 copy and paste into your image apply your chosen mask by clicking layers load/save mask and choosing your mask then you merge the mask layer by clicking merge, then merge group Now you click on Selections select all, float, de-float, and I used element 13 without resizing it copy and paste into your image arrange as you like (you may use my tag as an example) then invert delete then invert again and you may place your tube into the image then invert delete and select none. Now I went back and added drop shadows to both the element and tube I used 3, 3, 90, 12.0 Next you may add elements of choice to suit your tag I chose element 31, move behind the tube and first element and added the same drop shadow duplicate and mirror... arrange as desired to suit your tube then I went back to my mask layer and selected all, float, de-floated again and added Element 11 in the upper left corner invert, delete select none. Next add element 22 and arrange as desired add the same drop shadow then duplicate and mirror. Next add element 32 arrange as you choose then duplicate and mirror Now add your copyright and name, re-size and you are done

This tutorial is written for those with a working knowledge of PSP. I use version 9 but any version should work. Supplies you will need:

A scrap kit of choice, I used a PTU kit called Serenity by Stacey's Designs A tube of choice:I chose the Art work of ©Angie Monasterio which requires a license you may purchase at CILM Animation shop if you choose to animate. Open a new image 750x750 You may re-size later. Choose a paper from your kit, I chose paper 1 copy and paste as a new layer into your image Next you load your mask from disk then click on the group, merge, merge group Now you may add your tube of choice and adjust using the deform tool to fit your mask. Add a drop shadow of choice, I used -2, -2, 90,11.0. Now comes the fun part adding your embellishments. I chose the candle re-sized @35 then again @ 20 and arranged in a grouping Then I chose the flower and the purple flower each re-sized 35 also arranged around the candle grouping each layer with a drop shadow of 2, 2, 100, 10 you may duplicate each layer as desired for placement. Next I chose the heart links with a 1, 1, 100, 10 and duplicated the layer. Next I added the butterfly pendant with the same drop shadow. Next I re-sized the Dangle 30 and added near the heart pendant drop shadowed 1, 1, 100, 10 free rotated 15 to the left then duplicated and free rotated 25 to the right next I used the erase tool to erase bits for effect. You may re-size and add your copyright now. Add your name and you are done unless you will animate. If you choose to animate: go to your first candle layer, using your wand tool highlight the flame area as desired then duplicate the layer twice. go back to the first layer and go to effects, distortion effects then punch I used 15 on the first layer, then I repeated the steps on each of the other layers using 75 on the second layer and 100 on the last. Since I used more than on candle I repeated each of the steps on candles 2 and 3. On Candle 2 I used 20 on the first layer, 60 on the second layer and 80 on the third. On candle 3 I used 30 on the first layer, 50, on the second layer, and 90 on the third. Now ex-ing out layers 2 & 3 on all of your candle layers (all original candle layers should be visible) copy merged and move to animation shop Now ex-ing out original layer and layer three (all layer 2 candle should be visible) copy merged and and paste after current frame in animation shop. Again ex-ing out original layer and layer 2 (all layer 3 candles should be visible) copy merge and paste after current frame. Save the animation, and you are done.

This tut was written by me and any resemblance to any other is purely coincidental this tutorial is for those with a working knowledge of PSP. Supplies used: Scrap-kit from Bluedream Designs ~~Valentine~~ Artwork: by Zindy You need a license to use her art you may purchase one HERE Font: Zoe Mask of choice: I used a mask labeled 179 I'm not sure where it came from but if it is yours please let me know so I can credit you Open a frame I used Frame 1 duplicate (Shift D) then close the original. Re-size your canvas 750 X750 Click inside the frame using you wand tool then Selection, modify expand by 3 Copy a paper of choice I used paper 1 and paste as a new layer invert, delete, select none Move paper under the frame layer, and add a drop shadow to your frame now(I used 2,2,90,8) create a new raster flood fill with a color from your tube or any elements you choose apply your mask merge group create another raster flood fill with another color from either your tube or elements apply your mask merge group then flip and re-size 110 Paste your tube underneath your frame layer and re-size to fit. Add a drop shadow of choice (I used 2, 2, 80, 9) Now it is time to add your embellishments. I chose Butterfly one with a drop shadow of -2,-2, 80,8 re-sized 90 Then I chose Diamond doodle 1 with a drop shadow 2,2,80,2 then duplicate layer and flip then mirror merge and place under the paper layer but above both mask layers

I chose pen one with the same drop shadow re-sized 65 Then I chose Rose2 and pearls2 I used the deform tool to re-size these and Bow 1 using a variation of my drop shadows in combination add your copyright , re-size as desired and add your name you now have a new tag!!

This tutorial is meant for those that have a working knowledge of PSP. This tutorial was written by me and any resemblance to any other is purely coincidental. Supplies you will need I used PSP 9, but any version should do. You will need a tube of choice I chose the Artwork of Jamie Kidd You need a license to use her work, you may purchase it from CILM A scrap kit of choice, I'm using a PTU kit from Juicy Bits Sophisticated you may purchase it HERE Eye Candy 4000 ~ Gradient Glow Font of choice, I used AlexBrush Open a frame from your kit, in this case I chose the oval frame duplicate (Shift D) and close the original Re-size the frame by 150 (if using this kit), then re-size the canvas to as you may need (I re-sized to 649 X851) click inside the frame using your wand tool click selection, modify, expand by 3 choose a paper from your kit (I chose paper 10 and I adjusted the hue & colorized) paste as a new layer invert then delete Move the paper layer under your frame layer. You should add a drop shadow of choice to the frame now (I used 2, 2, 80, 9) Copy and past your tube inside of the frame then move the tube layer underneath the frame. Add the drop shadow of choice I used 2, 2, 80, 9 then -2, -2, 80, 9. Then I used the plug-in Eye Candy Gradient glow using the below settings ( 3, 25, 83, 50 on the opacity under color). Now comes the fun part choosing and positioning your elements. I started with the flourish and used the deform tool to re-size and position place below the paper frame, duplicate and position toward the bottom of the frame, use my tags as a guide if you like Ribbon 4 adjusted the hue and colorized then used the deform tool to re-size and place, I used gradient glow to match what was used on the tube, then duplicated it and mirrored and flipped it and placed under at the top the flourish use my tag as a guide Then Butterfly 2 re-sized 45, rotated using the deform tool then the same gradient glow as above. Re-size as you like, Add your copyright information and your name and you are done!