Search

My Blinkies

Photobucket
Photobucket

Stuff

MyFreeCopyright.com Registered & Protected

Designers I CT for


 photo WickedPrincessScraps.gif
 photo JoCTblnk1_MadebyAngelsDesignz.gif
 photo 153ky2f.gif

Blogs I support

Photobucket

CU Licenses I hold

Photobucket
 photo HF_PCU4CUKadodledbyKaciLicense-Resized.png

Total Pageviews

Tags w/ Kits&Kadoodles

Networked Blog

Blogroll

Saturday, January 28, 2012

Memoirs (PTU) (Extras)


This tutorial was written entirely by me, using PSP9, any resemblance to any other is purely coincidental.
This tutorial should work with any version of PSP.
This tutorial is written with the belief that you have a working knowledge of PSP, but is also suitable for beginners.

Materials you will need:

Scrap Kit of choice, I used Mauve Memoirs by Irenea Alexeeva Scraps.
Tube of choice, I used the art of ©Barbara Jensen which requires a license which may be purchased at here.
Mask of choice, I used one that I made, and it may be found here.
Font of choice, I used Before the rain

Filters:
EyeCandy ~Gradient Glow~

Let's begin.
Open a new image 750x750 you will re-size later.
Copy and paste two different glitter elements from your kit copy and paste as a new layer into your image.

Choose a paper then copy and paste as a new layer into your tag then apply a mask. merge the group.

Position the glitters to show as you'd like from beneath your mask layer. 

Copy and paste as a new layer your glitter frame re-size as needed (I re-sized 35).
Choose a complimentary frame and place above the glitter frame again re-size as needed (I re-sized 35).Add a drop shadow (2,2,70,12).


Using your ribbon or ribbons elements re-sized 20 and copy and paste as a new layer into your tag. Add your drop shadow as desired.
Using your deform tool, Position and place these elements to "wrap " around the frame layer. Duplicate move above the frame layer, and use your erase tool to complete this placement.

Using a close up of your tube colorize, using the colorize tool, to compliment your paper. Above your group mask layer copy and paste the colorized tube as a new layer.
Apply the same mask you used on your paper and merge the group. Go to properties change the blend mode to screen.
You may add a scatter here above this layer using the deform tool to arrange, then adjust the opacity of the level to suit you.
Place a petal element from your kit re-size 50 and use your deform tool to adjust as desired. Add a drop shadow and a gradient glow as desired.

Now position  your tube as desired above your petal layer adding your drop shadow and gradient glow to suit your vision.

Choose other elements to suit your vision and re-size 15-20 and position around the elements in place to achieve the results you want.
You may use my tag as a guide if you'd like. I used leaf elements,a swirl, flowers, crystals, water drops and bubbles. Use drops shadow and gradient glow to achieve the desired result.

Now re-size your tag, add your copyright and your name.

Thank you for trying out my tutorial.

Here are some extras.

No Drama (PTU) using Alika's Scraps (Extras)


This tutorial was written entirely by me, using PSP9, any resemblance to any other is purely coincidental.
This tutorial should work with any version of PSP.
This tutorial is written with the belief that you have a working knowledge of PSP, but is also suitable for beginners.

Materials you will need:

Scrap Kit of choice, I used No Drama Allowed by Alika's Scraps.
Tube(s) of choice, I used the art of ©Verymany this work requires a license which may be purchased at PFD.
Mask of choice, I used one that I made, and it may be found here.
Flame brush of choice, here is the one I used. It was made specifically for use with this kit.
Font of choice, I used Alfred Drake

Let's get started.

Open a new image, 750x750 you will re-size later.
Choose glitters from your kit I used both from this kit. Copy and paste as new layers until there is glitter scattered all over your image.
Pick a paper from your kit, copy and paste as a new layer into your image.Apply your mask and merge the group.

If you choose you may use white as both colors you may use a flame brush to adjust some extra "flames" around your mask layer.

Place one of the film strips from your kit then using the magic wand tool the inside of each square.Use your deform tool to rotate and position.
Using the tube or tubes of choice and copy and paste as a new layer a close up of your tube into each square inverting and deleting after each (re-invert between each placement).
Select none. Duplicate each close up, and on each use a Gaussian blur of 2 then change the properties to overlay.
On each original layer use the colorize tool to make the tube a color to match your kit.
Now add a drop shadow of choice to your film strip layer.

Choose a ribbon from your kit and place beneath the film strip layer and position as desired add the drop shadow, then duplicate.
Move the duplicate layer above your film strip layer and use your erase tool to "wrap: the ribbon around the strip.

Place a swirl type element above the Mask layer, and you may do the same with others beneath the mask layer. Follow your vision.

Using your flame element place around your film strip for the desired effect. duplicate and re-size by 80 place another by the other side of the strip as well.

Now place your tube or tubes around the flames and film strip as desired.Add a drop shadow and use your erase tool to suit.

Using your lips or "kiss" element and re-size by 50 twice. Add a drop shadow and position as desired. Duplicate and mirror. Reposition the duplicate layer to suit.

Using word art from your kit re-sized as necessary. You may use a drop shadow here as well.

Now re-size, add your copyright and your name.

Thank you for trying my tutorial.

Here are some Extras.
Wednesday, January 25, 2012

Bubble Fairy (PTU) using Horsedreamn Designs (Extras & Stat)




This tutorial was written entirely by me, using PSP9, any resemblance to any other is purely coincidental.
This tutorial should work with any version of PSP.
This tutorial is written with the belief that you have a working knowledge of PSP, but is also suitable for beginners.

Materials you will need:

Scrap Kit of choice, I used New Beginnings by Horsedreamn Designs.
Tube of choice, I used the art of ©Melissa Dawn which requires a license which may be purchased at CDO.
.
Mask of choice, I used WSL_Mask152, and it may be found here.
Font of choice, I used Beyond Wonderland

Filters:
EyeCandy ~Gradient Glow~

Let's Begin:
Open a new image 750x750 you will re-size later.
Open a paper from your kit I used paper 10. copy and paste as a new layer into your image, re-size as necessary.
Add a Gaussian blur of 3 (adjust, blur, Gaussian blur). Apply your mask (Layer, load/save mask).
Merge the group (Merge, Merge group).

Choose a frame from your kit (I used Frame/element 10) re-size as needed I re-sized by 50 then by 80. Add a drop shadow of3,3,70,12. You may choose to add a gradient glow to this as well , I didn't.
Pick a glitter from your kit I used element 11 re-size as needed - re-size 80 then duplicate and re-sized 80 again then flip and mirror.
Add a gradient glow with these settings.


Now move these layers beneath your group mask layer.

Just above these layers copy and paste as a new layer a butterfly element from your kit I chose element 15 re-sized by 20 twice.
Add a gradient glow and position around your glitter layer. Duplicate and mirror and position near the other glitter element.
Choose ribbon and string elements re-size as needed I re-sized varying between 60-80, if necessary use your deform tool to achieve the desired effect.
Flip and mirror these elements until you achieve the desired effect then add the same drop shadow as above.

Pick your flower elements re size 20-25 once or twice until you achieve your vision, add a drop shadow and-position.
You may use my tag as a guide, or go your own way... this is about creativity.

Place your tube and both drop shadow and gradient glow. Duplicate and move the duplicate level above the frame level.
Using your erase tool erase any bits to assist in blending your tube well.

Re-size add your copyright and your name you have completed my tutorial.

Thank you for trying my tutorial.

Here are some extras for those that want them.
Here is a stat for those using Incredimail.



Tuesday, January 24, 2012

Snooki (PTU) using Wicked Princess Scraps (Extras & Stat)


This tutorial was written entirely by me, using PSP9, any resemblance to any other is purely coincidental.
This tutorial should work with any version of PSP.
This tutorial is written with the belief that you have a working knowledge of PSP, but is also suitable for beginners.

Materials you will need:

Scrap Kit of choice, I used Snooki by Wicked Princess Scraps.
Tube of choice, I used the art of ©FourXsDesigns. You need a license to use this work you may purchase one at PTE.
Mask of choice, I used on called Vix_Mask226. You may download this mask here.
Font of choice, I used Lovers Quarrel ROB (PTU)

Let's get started.

Open a new image 750x750. You will re-size later.
copy and paste a paper from your kit I used paper 9. Next apply your mask, Layer, load/save mask. Then merge, Merge group.

Next take the film strip element re-sized 80. Next take the city scene re-sized 90, and place beneath the strip layer.

Go back to the strip layer and using your magic wand tool click within each of the larger squares.
Copy and paste as a new layer a copy of your tube within each square inverting and deleting after arranging each tube within the space.
Now going to each layer use your colorize tool to color the tube each one a different color.
Merge each layer after colorizing all four until they are all on layer, and move this layer beneath the film strip layer, but above the city scene.
Alter the opacity until the city scene is slightly visible. Approximately 76.

Place your main tube as desired.Add a drop shadow and duplicate. on the duplicate layer add a Gaussian blur, go to adjust, blur, Gaussian blur 3.
go to properties and change the blend to overlay.
using the cherry element and lips element re-sized by 50 twice. using your cherry element place on the film strip twice as desired ( you may use my tag as a guide)
then duplicate the element and place a second element to compliment. Now duplicate each of those and move beneath the film strip layer.
going back to the two original layers and using your erase tool erase portions of the elements to "hang" on the strip layer.
Go back to the lips element and place and then duplicate twice and arrange the three elements as desired.Add a drop shadow the elements as desired.

Choosing the elements desired re-size varying between 40 and 70, and using the deform tool as needed begin placing them around your film strip.
Use the deform and erase tools to help position the elements in a desired manner.
If you choose to follow my tag as a guide, to position the shoes free rotate one shoe (re-sized by 50 twice)90 to the right, then using the deform tool rotate more until you achieve the desired affect.
Duplicate, under the duplicate layer place another shoe element re-sized in the same manner between the two rotated elements.
Add any desired drop shadows. With the erase tool erase parts of the duplicated rotated shoe element until it looks partially in front of the upright shoe layer.
For the musical notes place the element above the group mask layer re-sized 80 and duplicate and re-size the duplicate layer 80 again.
On both layers adjust the opacity until the desired effect is achieved.( Approximately 72)

You may use my tag as a guide, but always try to explore your creativity.

Re-size, add your copyright and your name.

Thank you for trying out my tutorial.

Here are a few extras, for those that desire them.

For Incredimail users here is a stat.


Sunday, January 22, 2012

Sexy Bad Girl (PTU) using Alika's Scraps (Extras & Stat)


This tutorial was written entirely by me, using PSP9, any resemblance to any other is purely coincidental.
This tutorial should work with any version of PSP.
This tutorial is written with the belief that you have a working knowledge of PSP, but is also suitable for beginners.

Materials you will need:

Scrap Kit of choice, I used Sexy EMOstyle by Alika's Scraps.
Tube of choice, I used the art of ©Tim Lowery. You need a license to use his work you may purchase one at PTE.
Mask of choice, I used on called Nik-Sloth. I'm not sure where I got this mask, but if it is your creation please contact me so I can credit you.
Template of choice, I used one that I made and you may download it here.
Gradient(s) of choice.
Font of choice, I used A&S Blaze.

Filters needed:
EyeCandy 4000~Gradient Glow~

Let's get started:
You may open and duplicate your template, closing the original and deleting the credit information.

Choose a paper from your kit, I chose paper 9, copy and paste beneath all of the shapes layers.
Apply your mask of choice, Layers, Load/Save mask, then merge, merge group.

Now copy and paste your star glitter element either element79 or 80 move it beneath the mask layer and duplicate then flip.Adjust as necessary for effect.
Now on your black rectangle go to effects, texture effects, tile You may use your own setting or apply mine
 with a color from your tube.
Apply your drop shadow and gradient glow of choice.

Next rotate the Aqua Rectangle layer and rotate 90 using the free rotate. Using your magic wand tool select this rectangle,and flood fill with your gradient of choice Select none.
 Add your drop shadow and gradient glow to this layer too.

Next using the heart scatters elements 75 or76 paste as a new layer, use your deform tool to fit into the rectangle area, add a gradient glow, duplicate and flip.
Move the flipped layer to compliment the original layer.

Next above the black star layer use one of the fence stars elements 72,73 or74 and place adding your drop shadow, I used 0,0,70, 10.

Now place the triple stud layer across your horizontal rectangle layer re-size as necessary. duplicate this layer.
Next take one of the Ankh crosses(elements 61, 62 & 63) and place between the two layers.
Going to the duplicate layer of the studs erase areas to make it appear that the ankh is hanging on the stud.
You may also erase the the third stud, unless you decide to place an element. I erased it on both layers.
add your drop shadow to the ankh layer.

Add a heart dangle and "hang" from the second stud in the same manner as the ankh, add your drop shadow. 
Next "hang" the spiked ring just above the dangle in the same manner.

Now on the larger circle using your magic wand select the lighter area within the circle, flood fill with a lighter gradient than used on the horizontal rectangle.
Next paste a close up layer of your tube then invert delete select none. Duplicate this layer on the duplicate layer colorize this layer a complimentary color to your tag.
Then adjust, blur, Gaussian blur, 3. go to properties and change the blend mode to overlay. Go back to original layer and change the Blend properties to Luminance (Legacy).
Repeat the selection and placement of the tubes steps with the smaller circle using a different part of your tube, but all the same settings used on the larger circle.
Adjust the Opacity on these layers as desired I adjust all tube layers on the circles to 70.

Now place your tube layer beneath the heart dangle layer and add your drop shadows and duplicate. Move the duplicate layer above the heart dangle layer.
Using your erase tool erase bits of your duplicate tube layer to make it appear as though the hear is "between" the legs of your tube.

Now you may place complimentary elements on your tag. Re-size and use your deform tool as necessary to adjust element size.
add your drop shadow and gradient glows as desired. 

As always you may use my tags as a guide, but be as creative as you'd like to suit your tag.

Once you have added your desired elements and adjusted them as necessary, Re-size your tag, add your copyright and your name. 
You have completed my tutorial, Thank you for trying it out.

Here are extras for those that use them.
And for Incredimail users here is a complimenting stat.

Fairy World (PTU) using Wicked Princess Scraps (Extras & Stat)



This tutorial was written entirely by me, using PSP9, any resemblance to any other is purely coincidental.
This tutorial should work with any version of PSP.
This tutorial is written with the belief that you have a working knowledge of PSP, but is also suitable for beginners.

Materials you will need:

Scrap Kit of choice, I used Wishes for the World by Wicked Princess Scraps.
Tube of choice, I used the art of ©Kurama Phoenix which requires a license which may be purchased at here.
.
Mask of choice, I used Vix_BigMask019, and it may be found here.
Font of choice, I used

Filters:
EyeCandy ~Gradient Glow~

Let's Begin:
Open a new image 750x750 you will resize later.

Copy and paste a paper choice into your image I used paper2, and apply a mask (Layers, Load/Save mask,)
then Merge the group (merge, merge group).

Next choose a frame from your kit I used bow tie frame, copy and paste above the group layer.
Using the magic wand tool click inside each opening. Modify, expand by 3.
Now choose either another paper or a background (I used the jpg background of my tube) and paste as a new layer,
position as desired and invert and delete. Select none. Move beneath the frame layer.

Go back to the Frame layer and add your drop shadow, I used 0,0,70,10.

Now Place your tube as desired adding a drop shadow and gradient glow as desired.

It is time to select and place your elements.

I started with the butterfly elements and added a drop shadow & gradient glow then duplicated and mirrored.
Move one layer just above the group layer and position around your frame and background layers.

Next I chose the leaf branch element resized 70 using the deform tool and duplicating to fit the needs of the tag.
Repeat this with the pansy vine element. Adding various drop shadows and or Gradient glows to each of the leaf and pansy layers.

Next resize your tag, add your copyright and you name.

You have completed my tutorial.

Thank you for trying it out.

There are Extras for those that would like them

Here is a Stat/letter for Incredimail users.



Photobucket
Saturday, January 21, 2012

Lovely (PTU) using CBJ Scraps (Exclusive) (Extras & Stat)



This tutorial was written entirely by me, using PSP9, any resemblance to any other is purely coincidental.
This tutorial should work with any version of PSP.
This tutorial is written with the belief that you have a working knowledge of PSP, but is also suitable for beginners.

Materials you will need:

Scrap Kit of choice, I used With Love Exclusive Kit by CBJ Scraps and it can be found here.
Tube of choice, I used the art of ©Zindy S.D. Nielsen which requires a license which may be purchased at Zindy Zone.
Mask of choice, I used MaskCris19, I'm not sure where I got the mask, so if it is yours please contact me so I can credit you.
Font of choice, I used Volutes.

Filters:
EyeCandy ~Gradient Glow~

Let's get started!

Open a new image 750x750, don't worry you will resize later.
Next choose a frame from your kit, I chose the cluster frame.

Next using your magic wand tool click inside each of the squares of the frame.
Selections, Modify, Expand by 2. Now choose a paper from your kit I chose paper8.

Paste as a new layer, invert and delete, select none. Move this layer beneath your Frame layer.
Go back to your frame layer and add your drop shadow I used 0,0,80,10 and a gradient glow of choice.
Next you may place your tube as desired adding a drop shadow and a gradient glow.

Now begin placement of your elements, Start with the petals element resized 70, and duplicate and resize as needed and position as desired behind your tube.

Next place the heart scatters elements beneath your tube, or in a complementary position.

Next resize and place a ribbon element, I resized 70 and duplicated and mirror with each element you may add a drop shadow or a gradient glow as desired, or both.

Now resize your lovely element resized (I used 70) as needed use your deform tool achieve the result you desire.

Next you can take your clock element resized 70 and adjust using the deform tool.

Now take the crystal heart element and place above your clock element duplicate mirror and merge down.

Next place the ribbon elements beneath the clock element resize as necessary.

Now resize your tag, add your copyright and your name.

You have now completed my tutorial.


You may download extras here if you'd like.

Here is a complimentary Stat for Incredimail users.

Photobucket
Wednesday, January 18, 2012

Love Always (PTU) using Stargazer Musings scraps (Extras)

This tutorial was written entirely by me, using PSP9, any resemblance to any other is purely coincidental.
This tutorial should work with any version of PSP.
This tutorial is written with the belief that you have a working knowledge of PSP, but is easy enough for a beginner as well..

Materials you will need:

Scrap Kit of choice, I used Always in Love by Stargazer Musings.
Tube of choice, I used the art of ©Zindy S. D. Nielsen which requires a license which may be
purchased at Zindy Zone.
Mask of choice, I used mask 297 by WeeScotsLass, and it may be found here
Font of choice, I used Billy Argel font.

Filters:
EyeCandy 4000 ~Gradient Glow~

Let's get Started.

Open a new image 750x750.
Copy a paper from your kit I used paper eight and paste as a new layer in your image.
Apply your mask~ click layer, Load/Save mask, Apply.
Merge group~ click merge, merge group.
Next take a frame from your kit, I used frame 2 and resized 70. Add a drop shadow of choice, my choice was2,2,80,12.
Next add a gradient glow using these settings:





Next place your tube under the frame, position as desired,Add your drop shadow and gradient glow as desired; then duplicate and move duplicate level above the frame.
Using your erase tool erase bits of the duplicate tube so the it is positioned as desired to "come out of the frame".
Now it is time to start choosing and positioning your elements the first is the bead string, place beneath your frame, and using the deform tool position as desired.
You may resize if it suits you, but I did not.
For all elements, you may use my tag as a guide, or go your own way, this tutorial simply stimulates creativity.
Next crop your image as to release any "extra" from around the tag.use your erase too to help "fade" the edges of the string.
Add your drop shadow.
Using the bead string again this time resized 60, position as desired above the frame, you may again use your deform tool to arrange it as suits your tag.
Add a drop shadow. Now using the glass heart charm resized 70 twice position as desired on the second bead string.
Duplicate and move original under the string layer, add a drop shadow.
Go back to the duplicate layer and erase small bits so it "floats" on the string.You may repeat these steps with the Diamond lips, Diamond Love & Diamond key.
Resize and use your deform tool as needed to suit your vision. On the original layers of each of the previous elements, in addition to the drop shadow I also added a gradient glow.
Next using the heart string element I placed it above the frame (use my tag as a guide) and added a drop shadow.
Now resize , add your copyright and you name and you have completed this tutorial.
Thank you for trying it.


Here are extras for those interested.






Monday, January 16, 2012

Two New Templates

I was in a snarky mood today thanks to my cranky three year old, and an awesome challenge in HoT.
So, I decided to make a couple of templates.
You may download the PSP image by clicking download beneath each template.
Saturday, January 14, 2012

Sweetness (PTU)Wicked Princess Scraps (With Extras)





This tutorial was written entirely by me, using PSP9, any resemblance to any other is purely coincidental.
This tutorial should work with any version of PSP.
This tutorial is written with the belief that you have a working knowledge of PSP.

Materials you will need:

Scrap Kit of choice, I used Strawberry Kisses by Wicked Princess Scraps.
Tube of choice, I used the art of ©Misticheskaya which requires a license which may be
purchased at PFD.
Mask of choice, I used one that I made, Mask 12, and it may be found here.
Font of choice, I used Butterfool Heart (PTU)

Filters:
EyeCandy ~Gradient Glow~

Let's get started!

Open a new image 750x750, you will resize later, I simply like a larger space to work with.
Rather than choosing a paper, we will start with a couple elements. I used Satin flower and strawberry bunch.
Place them as desired in the middle of your image area. You may use as many elements as you'd like.
Once you have an arrangement you like Merge, merge visible, then go to effects, image effects,
seamless tiling.
You may use whatever tiling you prefer, but these are the settings I used.

Once you have your tiled image got to Layer, Load/Save Mask, apply mask. Then Merge, merge group.
Now you may add your tube of choice add a drop shadow of choice, I used 0,0, 100, 12.Then I added a gradient glow with these settings.



Next you may choose elements to enhance your tube/tag, or you may use my tag as a guide.
I placed the sweet element resized 70 and added the same drop shadow & Gradient Glow as my tube.
The next element is a heart frame, positioned to suit your desire.Adding the same effects/filters as before.
Next comes the bag element resized 30. you may add the same effects used previously or simply a drop shadow.
Next layer your star splatter as desired and merge the layers and place under the original group layer.
You may also repeat this with the glitter layer or you may simply place the glitter layer alone under your original group layer.
Now choosing the flower, strawberry and cupcake elements resizes between 12-25 place to suit your tag.
I also resized the laces, a tag and an ornament and placed to compliment the tag.
To help adjust size for placement you may use your deform tool and your erase tool as well.
Now resize, add your copyright and name and you are done.
Thank you for completing my tutorial.

here are some extras if anyone is interested.

Kaci's Kits & Kadoodles

Hi, I'm Kaci. Nope not that Kaci, the other one. I am still fairly new to PSPing compared to some and I love it!! I want to continue to learn so I can get better and continue making my own scrap kits. I love to make new friends so stop by and visit my little corner over here.

I'm still learning to blog too, so be patient while I figure this out, and I'm learning to do blog layouts, lol. I'm happy to have a few followers and look forward to more.

I've recently ventured into Digital scrap-booking store ownership with friends, so feel free to check out the links on the page.

I also love to knit, crochet (not really good at that just yet), read, cook, bake and learn new things. Most of what I post will probably be PSP related, but Iwill occasionally vent here too. Please leave a comment let me know what you think or if you want me to try something for a freebie.

I would love to see the results of my tutorials if you want to share. Please email them to me at kaciskitsnkadoodles@gmail.com. I look forward to seeing results of my tuts so come on email me lol!!!

Followers

Leave a bit of Love

Licenses I hold

 photo crowe.gif
 photo BJBlinky2.gif
 photo CDOBLI11817.gif
 photo DLPinups.jpg
 photo EASbyDMM-vi.gif
 photo FXD-Store-blinkie150.gif
 photo gg3.gif
 photo gorjussblinkie04.gif
Jose Cano
 photo mtabl.gif
 photo mykagraphics_banner2.png
 photo 150x50.gif
 photo iws0g4.gif
Roman Zaric
 photo 1g4uibjpg_zps0a9af0b1.gif
Tony Tzanoukakis
 photo 2cjcb8.gif
 photo m9lfzq.gif
 photo UYAnew620.gif
Very Many Tubes
 photo zz.jpg

CLOSED STORES:
So Sweet Scraps
Scraps n Crap
MPT
PTE
The Hunter
PSP Asylum
Michi Art
 photo SATC_188.gif
 photo DSI-Banner1.gif

Counter

cheap calling cards

Categories