This tutorial is written for those with a working knowledge of PSP. It has been written entirely by me, any resemblance to any other is purely coincidental. Supplies needed: Scrap Kit of Choice I used ~Cupcake~ By Kia Glitz Scraps Tube of choice I used the art of ©Anna Marine a license must be purchased to use her work You may buy it from CILM. Mask of choice (optional) I don't have a name for the mask I used, but if it is yours please contact me so I may credit you. Eyecandy 4000 Gradient glow or equivalent. Font of choice I chose Satisfaction Let's get started Open a new image 750x750 (You will resize later) Choose a frame from your kit I chose Frame 3 next use your wand tool to select inside the frame then modify expand by3 now copy and paste a paper from your kit I chose paper 3 invert selection, delete, select none. now add a gradient glow (3,25,100)to your frame that compliments your paper and tube. a small drop shadow is added to the frame (2,1,90,1.45) Don't forget to move the paper layer under your frame. Now place your tube of choice into a position you like and add the mask of choice (if desired). Add a drop shadow I used 5,5,90,12 Now chose ribbons from your kit and use the deform tube to adjust to suit you, I chose ribbons 8, 10, 11, and 12 Position behind the paper and Frame layers to suit you. Next add a clip (or any other element that you choose) I used clip one and added under the paper layer and positioned around the frame. Next I duplicated the clip and adjusted on the other side of the frame for balance. Now resize and add your copyright information. Add your name You have now completed my tutorial.

This tutorial is for those that have a working knowledge of PSP. It has been written entirely by me, any resemblance to any other is purely coincidental. Supplies needed: Tube of choice I chose the Art of ©Kieth Garvey Use must purchase a license to use his work which may be purchased at MPT Mask of choice I chose Mask 200 by Insatiable Dreams Scrap kit of choice I used Fallen Evil Angel by Black Widow Creations Font of choice I chose Kingdom Hearts Let's get started... Open up a new image 750x750 Choose a paper from your kitI chose paper 18 copy and paste into your image Apply your mask click on Layers then Load/Save Mask, next merge, merge group Next you may place your tube and add a drop shadow of choice I used 3,3,100, 12 Now choose your elements and place them as you choose. I started with element 5 I adjusted the hue to fit my tube and paper next you may go to effects and texture effects fine leather Adjust the color to compliment your tube and adjust the settings to your liking. I chose Angle 270, Blur 0, Transparency 255, Number of Furrows 649, and length of furrows 2. Place behind your tube. Next using your wand tool click in the circles to select copy and paste as a new layer either a close up of your tube or different parts of your tube invert and delete repeat for each circle, then place under the circles. Adjust transparency and change the properties to luminance legacy to suit yourself. Next I chose Element 14, then element 21 both as is. Then I resized elements 24, 28, and 8 resized 40. Place all of the elements in any manner you choose, with a drop shadow of 3,3,100,12. You may use my tag for a reference if you like. Finally I choose elements 52 and 53 and placed just above the mask layer mirroring as needed. Now resize and add your copyright information then your name and you have completed my tutorial. Thank you. Feel free to email me your results so I can post to my blog!

This tutorial is written for those with a working knowledge of PSP. I used Version 9, however any should work. This tutorial was written entirely by me and any resemblance to any other is purely coincidental. Supplies you will need: Tube of choice I chose the art of Camilla Drakenborg. You need a license to use her work, you may purchase one at CILM Scrap-kit of choice I chose SexyMaid by Fantasy Dream Designz Which may be purchased at Scrappin with Friends 2 complimentary masks of choice I chose sg_star-crossed & sg_star-vortex. I do not know where the masks originated, if they are yours please contact me so that I may credit you and supply a link to your site. EyeCandy 4000 Gradient Glow Font used AndanatinoJF Lets begin! Open a new image 750x750 ( You will re-size later) Choose a paper from your kit,I chose paper9, copy and paste as a new layer into your new image click on layers, load/save mask, and apply your first mask, merge, merger group. Next copy and paste another paper from your kit I chose paper24, mask, click on layers, load/save mask, and apply your second mask, merge, merger group. Now choose a complimentary frame from your kit in this case I chose element48, now select all, float, defloat, modify, expand 7 and copy a third paper as a new layer into your tag, I chose paper4. invert your selection, delete, and select none. Move this paper below your frame layer. I added a drop shadow to the frame layer of 3,3,100,10. Now it is time for tube placement place tube between the 3rd paper layer and the frame, adjust and erase as necessary or repeat the above process to suit your needs. I added a drop shadow to my tube of 1,1,80,12. Duplicate tube layer on your copy layer go to adjust, blur, Gaussian blur of 3, now click on properties and change the blend mode to soft light. It is element time! I started with element 83 free rotated 10 to left, drop shadow 1,1,80,12. Now duplicate this layer and adjust behind the first layer as desired, I used free rotate 23, and adjusted as needed duplicate the copy moving this layer above the original layer and erase where needed to blend. I added element 8 and re-sized by 25 then used the deform tool to adjust further as I needed. Next I used elements 52, and 68 re-sized 25, drop shadow same as above and added a drop shadow to each layer of 1,1,80,12. then I added a gradient glow in a complimentary color with a 3,80,90. then I used a thin white gradient glow with the same settings. Next I repeated the above steps with element 70 re-sized 40. Finally I added elements 72, and 77 added a drop shadow of 1,1,80,12 Add your copyright and re-size. Add your name and you have completed my tutorial.

This tutorial was written for those with a working knowledge of PSP. I use version 9, but any should do. This tutorial was written entirely by me, any resemblance to any other is purely coincidental. You will need: A Mask of choice I used 164 from InsatiableDreams. A tube of choice I used the art work of ©Giada, you need a license to use her work. You may purchase that at Dreamscape Imaging (DSI) Scrap kit of choice I chose DarkDesire by Broken Sky Dezine Font used Waters Gothic. Let's get started! Choose a paper from the kit I chose paper7 copy and paste as a new layer. Now go to layers and click Load/Save mask and apply your mask of choice. Now you place your tube as desired.I added a drop shadow of 3,3,80,12.00 Now is the fun time time to pick elements I chose candle 4 resized 40 and duplicated it twice. I resized one 105 and moved it behind the first and then resized the second layer and resized 90. I then merged the layers and added a drop shadow of 3,3,80,12.0 I chose the gotharch next resized 40 I placed behind the tube and candles layer and added a Gaussian Blur (click Adjust, Blur, Gaussian blur) of 1.00 to soften. I next chose rose4 and I resized using the deform tool and also used that to rotate into position. Then I took both dead roses and resized using the deform tool again to resize and rotate into position. I added a drop shadow of 2,2,80,12.0 Next I chose the candle resized 20 and positioned behind my tube layer. I added a drop shadow of 1,1,80,12.0 Then I resized bottle 1 & 3 40 I used the deform tool to position and size as desired. I also colorized bottle three to suit my purposes. Finally I used glidder2 over the mask layer and reduced the opacity to 60. Now you add your copyright and you name and you have completed my tutorial.

I made a scrap kit. Well a mini one any way... I've been wanting to try my hand at scrap making and here is my first result. I'm giving it to you here as a freebie... I hope you enjoy it. Let me know you downloaded and feel free to share your results so I can post them.


Download HERE


Here are some results using my freebie

This tutorial is written for those with a working knowledge of PSP. I used version 9 but any should work. This tutorial is written entirely by me any resemblance to any other is purely coincidental. Supplies needed: Tube of choice I chose the work of ©Keith Garvey you may purchase a license to use his art at MPT. Scrap kit of choice I used Sugarbaby by ChaneyJo's Creations. Template of choice I used #168 from Blissfully Beth Mask of choice (Optional) I used #227 from Vix Eye Candy 4000~Gradient Glow Font of choice I chose Mon Amour Script which is a pay to use font. Open up your template shift D to duplicate then close the original. On the background layer, if you want to keep it, shift H to adjust and colorize to match your kit or your tube. Then if you'd like you may add your mask (Layers, Load/Save mask) You may have to re-size some depending on your mask (I re-sized that layer 130) Next add some sparkles from your kit. I used sparkles2.Re-sized 130. Now click on the PBG layer of your template select all, float, defloat, then copy and past a paper from your kit I used paper9. Then invert and delete select none. You may either delete the original layer or merge down (I merge down) Repeat this with the Gray half oval layer with a different paper, I used paper2. Now repeat the process with the purple half oval layer. I used paper14 I repeated the process with the Dark oval layer as well, except here I copied merged the confetti2 element. Repeat the process for the Lt & Rt SQ BG Using paper8 On the white oval frame I added a drop shadow of 1,1,100,1 and -1,-1,100,1 On the black stripes and the Rt & LT Squares I added a gradient glow settings 5, 20, 80, with a complementary color from my pallet. Now you may place your tube as you like. You may colorize your word art or use one from your kit, arrange as it suits your tube. I used light flare 1 first to highlight my tube. Then Glitter swirl4 and Glitter swirl2 then Stardangle1 You may reference my tag for placement if desired. I used heartlock 3 re-sized 25. Duplicate and rotate until you get the effect you like' Now add your copyright, re-size, then add your name and you have completed my tutorial.